Niagara Pump International
Premiere Niagara pumps are the ultimate benchmark in design, flexibility and performance. From small applications for zone seating and focused therapy up to multi pump configurations to run 100+ jetted systems, Niagara pumps supply the specific performance features you require and the long service life and powerful performance spa owners demand.
Niagara Pump International
Premier Niagara pumps are the ultimate benchmark in design, flexibility and performance. From small applications
for zone seating and focused therapy up to multi pump configurations to run 100+ jetted systems, Niagara pumps supply
the specific performance features you require and the long service life and powerful performance spa owners demand.
| 50Hz Performance Curve International Models | ||||
 |
||||
Niagara pumps offer the options you need…an energy-efficient package, unsurpassed design, flexibility, ease of installation, high flow rate and dependable operation. Contact your Balboa Water Group representative for more information.Features • High flow rates exceeding 44 m3/h for maximum performance in your luxury applications. • All seals are carbon ceramic with Viton® Elastomers for long-lasting performance, easily enduring prolonged heat and chemical exposure. • Multi-directional volute mountings provide the flexibility to accommodate any configuration; 63mm, 2” and 2.5” union options. • Choose single or 2-speed motors from 2 or 3 HP. With 2-speed models, sanitation and heating can occur while maintaining lower operational costs. • Specify an ultra efficient motor and our highest efficiency hydraulics versions help meet appliance efficiency regulations. • The pumps are supplied with centre suction and 2 drain connections to ensure total drainage of pump. • The Niagara pumps are VDE approved according to European norms EN60335-1 and EN60335-2-41.Specifications • 90 frame size • True rated 2 and 3 HP models • Center suction / radial side discharge orientation • 230V, 50Hz TEFC motors for Europe, IPx5 • 2″ suction and discharge port • Class F insulation • Cable with AMP plug, ready for all spa pack or plug and play connection |
| Refer to table below for each letter. |
Pump Dimensions (MM) – D & E represent center line of mounting holes
|
| Material Number |
Volt/Hz | KW | Amps | HP |
Speed |
Cable |
A |
B |
C |
D |
E |
F |
G |
H |
| 1023321 | 230/50Hz | 1.6 | 8.7A | 2 HP | Single | 3 m with AMP plug | 397 | 67 | 109 | 102 | 125 | 203 | 168 | 94 |
| 1023322 | 230/50Hz | 1.9/0.40 | 9.0/1.9A | 2 HP | 2-speed | 3 m with AMP plug | 459 | 67 | 109 | 125 | 140 | 203 | 203 | 94 |
| 1023331 | 230/50Hz | 2.5 | 11.5A | 3 HP | Single | 3 m with AMP plug | 459 | 67 | 109 | 125 | 140 | 203 | 203 | 94 |
| 1023332 | 230/50Hz | 2.5/0.55 | 11.5/2.5A | 3 HP | 2-speed | 3 m with AMP plug | 459 | 67 | 109 | 125 | 140 | 203 | 203 | 94 |
The 2-speed pumps with 2 Amp values pumps, show the values at high and low speed.
Unions And Noise Abatement
Union Kit Female 2” Socket – Material No: 2614029
Union Kit Female 63mm Socket – Material No: 2614020
Union Kit Female 2.5” Socket – Material No: 2614030
Vibration Mount – Material No: 1216001